4-Cyl/02J Complete Mount Kit - VW MK2

The Fabless 4-Cyl Complete Mount Kit for the VW MK2 can be used a direct replacement for MK2 factory 4-cylinder engine mounts or they can be used to swap in a 1.8T or another 4-cylinder engine listed below. Compatible with the 02a/02J 5 speed transmission.

Our mounts are stronger and stiffer than the factory mounts while also providing some adjustability on the Block Mount. The block mount has two positions factory height (top position) & up to a 16mm drop (lower setting); 16mm drop with MK3/Corrado VR6 Subframe, 8mm drop with MK2/Corrado G60 subframe selection. The lower setting on the mount is useful for additional hood clearance.

The Fabless MK2 4-Cylinder Complete Mount Kit is a full mount solution, providing an upgraded front cross member and all the mounts needed for a completely bolt in swap.

These mounts are OEM position, which means they work with factory axles. 

What’s Included

• 4-Cyl Block Mount with polyurethane bushing
• 02A/02J Transmission Mount with polyurethane bushing
• MK2 Tubular Front Cross Bar with Front Engine Mount
• Zinc plated mounting hardware
• Black powder coat

Add-Ons/Compatible Products

• Adjustable Upper Rad Mounts (VR6 Radiator)
  
• Polyurethane Jack Pad

Compatibility

Vehicles

• VW MK2 Golf/Jetta

Engines

• 1.8T*
  
• 1.8L 8v/16v
• 2.0L ABA/16v
  
• G60
• ALH**

* Additional hardware is needed in most 1.8T applications as the factory starter bolts are not long enough to bolt on the Front Engine Mount. We recommend the Front Engine Mount Hardware [Starter Bolts] - 1.8T Swaps for 1.8T engines.

** 4-Cyl Block Mount is tested for turbo clearance with the VNT17 and K04 turbos. Note that the turbo outlet may need to be clocked differently, and the piping may need to be custom fabricated.

Transmissions

• 02A 5-Speed
• 02J 5-Speed

Axles

• Factory 100mm Axles

Radiators

• 8v/16v Radiator
• MK3 VR6 Radiator (North American)

Removable lower rad pins are provided for fitment of both rad types listed. For the MK2 rad support, we offer bolt in upper radiator mounts for both options. 

Fans

A factory fan set up will work, however if space or engine cooling is a concern, a slim fan set up with Spal fans is recommended. Check out our Engine Cooling dropdown under Swap Parts.